IL & DS In Line Balljoint & Swivels
- Ballpin retained by hardened and tempered retaining ring.
- Constructed in the same way as SR range with case hardened body and ballpin.
- Zinc plated and passivated for 96hrs salt spray
- 40° angular movement.
- LH threads available.
- M5 body is turned down to reduce weight.
- Suitable for lighter loads.
- Minimum end float.
- Good wear resistance.
| Type No | Standard Thread Types | Body Diameter | Ballpin Hex size | Body Length | Stud Thread Length (A) | Dim B | Dim C | Stud Pullout Force |
|---|---|---|---|---|---|---|---|---|
| IL107GS | M5 or 10-32 UNF | 11.11 [7/16"] | 9.35 [3/8"] | 25 | 11.1 | 11.88 | 18.5 | 250kgf |
| IL107G | M6 or 1/4"UNF | 11.11 [7/16"] | 9.53 [3/8"] | 31 | 14.3 | 11.88 | 24.58 | 250kgf |
| IL108G | M8 or 5/16"UNF | 12.7[1/2"] | 11.1[7/16"] | 35.7 | 17.5 | 13.48 | 28.57 | 500kgf |
| IL109G | M10 or 3/8"UNF | 15.87 [5/8"] | 12.7 [1/2"] | 42.9 | 22.2 | 17.46 | 34.92 | 700kgf |
- This is used in HVAC applications.
- The ballpin is held in place by the top of the body cavity which is rolled over.
- The body contains a neoprene washer which cushions movement and maintains the tension in joint.
- Suitable for lighter loads.
- The neoprene washer acts as a damper to reduce vibration.
| Type No | Standard Thread Types | Body Diameter | Ballpin Hex size | Stud Thread Length | Female Thread | Overall Length |
|---|---|---|---|---|---|---|
| DS107 | M6 or 1/4" UNF | 8 | 11 | 14.3 | 14.3 | 53.2 |
All Dimensions in mm
Illston and Robson Ltd